June 2019

Registration Open for June 11 – 12 Composite Training Workshop at Long Island’s Composite Prototyping Center

2019-06-06T05:53:13-07:00

Plainview, N.Y. & Knoxville, Tenn., June 6, 2019… IACMI – The Composites Institute in partnership with Composites One and the Closed Mold Alliance are hosting the composites training workshop, By Air, By Land, By Sea: Composites Get You There, at the Composite Prototyping Center in Plainview, N.Y. June 11 – 12, 2019. […]

Registration Open for June 11 – 12 Composite Training Workshop at Long Island’s Composite Prototyping Center2019-06-06T05:53:13-07:00

IACMI Welcomes 2019 Advisory Board Members

2019-06-04T10:28:45-07:00

Thank you to those who voted for the Collaborative Composite Solutions (CCS) Board of Directors and IACMI Technology Advisory Board (TAB). IACMI extends its congratulations to the newest CCS Board of Directors Members and IACMI TAB working to drive IACMI’s mission and composites consortium.

Incoming Board of Directors members include:
Hendrik MainkaVolkswagen, representing premium […]

IACMI Welcomes 2019 Advisory Board Members2019-06-04T10:28:45-07:00

May 2019

IACMI – The Composites Institute Engages Dept. of Energy Leadership and Showcases Innovation in Innovation XLab Series

2019-05-16T13:37:56-07:00

Derek Berry, IACMI Wind Technology Area Director and senior engineer at the National Renewable Energy Laboratory (NREL)’s National Wind Technology Center speaking with U.S. Department of Energy Secretary, Rick Perry, about the collaboration and innovation in the IACMI 9M wind blade technical project.

IACMI – The […]

IACMI – The Composites Institute Engages Dept. of Energy Leadership and Showcases Innovation in Innovation XLab Series2019-05-16T13:37:56-07:00

By Air, By Land, By Sea – Composites Get You There

2019-05-16T08:58:15-07:00

May 13, 2019 | Source: NetComposites 

By Air, By Land, By Sea – Composites Get You There

In partnership with the Closed Mold Alliance, IACMI presents the ‘By Air, By Land, By Sea: Composites Get You There’ workshop. The workshop will be held on June 11-12 in Plainview, New York, at the […]

By Air, By Land, By Sea – Composites Get You There2019-05-16T08:58:15-07:00

Techmer PM Opens Multimillion-Dollar Production Line to Support Demands of Large-Scale 3D Printing Industry

2019-05-10T05:32:18-07:00

May 10, 2019 | Source: Plastics Technology

Techmer PM has had significant growth in the additive manufacturing materials market, and opened a new multimillion-dollar production line. Techmer PM is a strong IACMI member, having validated technologies and materials through IACMI technical projects, such as the Techmer PM and Local Motors project. IACMI […]

Techmer PM Opens Multimillion-Dollar Production Line to Support Demands of Large-Scale 3D Printing Industry2019-05-10T05:32:18-07:00

Saab’s global defense and security company lands in Indiana, to open site near Purdue University

2019-05-09T08:34:44-07:00

May 9, 2019 | Source: Purdue University

We are excited to welcome Saab to Indiana, and look forward to the workforce development opportunities through this new location. This is a great opportunity for both our Purdue University and Indiana Economic Development Corporation partners. Read the full announcement here.

Saab’s global defense and security company lands in Indiana, to open site near Purdue University2019-05-09T08:34:44-07:00

April 2019

IACMI Hosts Community Forum in Miami on Composite Solutions for Infrastructure

2019-04-30T06:24:31-07:00

In Miami, the impacts of climate change and rising sea water are a daily reminder for the need for a more resilient infrastructure. On April 18, 2019, IACMI – The Composites Institute teamed with Mont Vista Capital, a Miami-based investment firm, to host a community forum aimed to spark dialogue within working groups and […]

IACMI Hosts Community Forum in Miami on Composite Solutions for Infrastructure2019-04-30T06:24:31-07:00

IACMI to host two-day SMC workshop

2019-04-24T09:50:16-07:00

April 19, 2019 | Source: CompositesWorld

Jim Plaunt (right) has more than 40 years of SMC and composite materials experience.

The “SMC 101: From What to Why” workshop, led by industry leader Jim Plaunt, will take place at IACMI SURF from May 22-23, 2019.

The Institute for […]

IACMI to host two-day SMC workshop2019-04-24T09:50:16-07:00

Industry expert to lead IACMI workshop, “SMC 101: From What to Why” at IACMI SURF

2019-04-12T10:00:37-07:00

April 12, 2019

IACMI SURF Vehicles SMC Schuler Jim Plaunt (right) has more than 40 years of SMC and composite materials experience.

This May 22 – 23, 2019, IACMI will host the two-day workshop, “SMC 101: From What to Why,” at IACMI SURF in Detroit, Mich., which […]

Industry expert to lead IACMI workshop, “SMC 101: From What to Why” at IACMI SURF2019-04-12T10:00:37-07:00

IACMI to host “SMC 101: From What to Why” Training Workshop at IACMI SURF

2019-04-23T06:28:31-07:00

Schuler compression molding press IACMI SURF Vehicles partsApril 11, 2019

IACMI will host “SMC 101: From What to Why” training workshop at the Scale-Up Research Facility (SURF) in Detroit, Mich., May 22 – 23, 2019.  The two-day workshop is open to anyone interested in SMC, and will […]

IACMI to host “SMC 101: From What to Why” Training Workshop at IACMI SURF2019-04-23T06:28:31-07:00
Load More Posts